Cheaper Metal Mesh Skirt

Post by **RedaV** » Fri Feb 15, 2013 12:50 am

Is gun metal grey the screen accurate color used?

Post by **Jace76** » Fri Feb 15, 2013 1:24 am

Given the company I'm ordering from offers multiple colors, including black and silver, I felt this one was the best match. I came across a couple older posts that toych on the topic of mesh color. Am I far off with the gun metal?

viewtopic.php?f=7&t=1239&p=18069&hilit= ... lor#p18069

viewtopic.php?f=7&t=531&p=16777&hilit=mesh+color#p16777

Post by **azuma** » Fri Feb 15, 2013 6:45 am

gun metal should be the correct one according to the previous posts.

cheers,
Azuma

Post by **Red Eye** » Fri Feb 15, 2013 9:32 am

Yes, gunmetal is the screen-accurate color.

It matches the color of the mouthpiece and sail panel decos on the helmet.

Post by **RedaV** » Fri Feb 15, 2013 4:44 pm

Kewl thanks for that hey

YouTube · Post by **Cylon-Knight** » Fri Feb 15, 2013 6:55 pm

@Jase76 - colors, colors, colors!
Here is more than you ever wanted to know: http://www.cylon-knight.com/art.htm

Post by **Jace76** » Fri Feb 15, 2013 9:19 pm

Cylon-Knight wrote:@Jase76 - colors, colors, colors!
Here is more than you ever wanted to know: http://www.cylon-knight.com/art.htm

Oooh colors! Its like a Cylon Castro District parade

LOL
Seriously though CK, you have such an awesome and comprehensive site! Very informative and resourceful!

@RedaV -I called the company I'll be ordering from and they do in fact ship internationally. The only thing is, they don't give you the shipping cost until you ask for it before submitting your payment info upon them emailing you to confirm your order. Hope that helps!

-J

YouTube · Post by **Cylon-Knight** » Sat Feb 16, 2013 8:35 am

Jace76 wrote:
Cylon-Knight wrote:@Jase76 - colors, colors, colors!
Here is more than you ever wanted to know: http://www.cylon-knight.com/art.htm
Oooh colors! Its like a Cylon Castro District parade LOL
Seriously though CK, you have such an awesome and comprehensive site! Very informative and resourceful

Order and perfection is the goal of the Cylon Empire.

Post by **RedaV** » Sat Feb 16, 2013 7:29 pm

Jace76 wrote:
Cylon-Knight wrote:@Jase76 - colors, colors, colors!
Here is more than you ever wanted to know: http://www.cylon-knight.com/art.htm
Oooh colors! Its like a Cylon Castro District parade LOL
Seriously though CK, you have such an awesome and comprehensive site! Very informative and resourceful!

@RedaV -I called the company I'll be ordering from and they do in fact ship internationally. The only thing is, they don't give you the shipping cost until you ask for it before submitting your payment info upon them emailing you to confirm your order. Hope that helps!

-J

Hey thanks heaps Jace I will be placing my order within the week. There is no where here in Australia to get the same thing. It's going to be so worth it!

Post by **RedaV** » Thu Feb 21, 2013 6:59 pm

Ordered my skirt today! As I'm a skinny Cylon I'm going to run with one piece to start with and see how easy or hard it is to join two pieces. Then might make a second order.

Thanks for all the help guys!

From down under

Post by **azuma** » Sat Feb 23, 2013 6:28 am

RedaV, good for you. Please let me know US$45 is for a piece of 18"x 30" or a piece of 18" x 60". I wrote them an email about it, but never get replied.

BTW, I am got to get mine on Monday. I will try to bargin with the store and tell them about the price listed on the US site. Maybe I can get some discount. Wish me luck

Azuma

Post by **azuma** » Mon Feb 25, 2013 3:55 am

Got my metal mash in gun metal just now. The color doesn't appear as good as I expected. Somehow it appears with greenish tone under the light, and isn't dark enough, but for the price it is very good substitute for completing the soft part of my cylon costume.

Thanks to the listing on "www.cutfabricinc.com", I was able to get 18" x 30" from my local shop for NT$1400 (they end up gave me NT$100 off for the piece), which is approximately USD 46 or 47, so that is about the same price if getting from "www.cutfabricinc.com". The shop owner told me if I want to buy more, they may be able to give me more discount, but I don't think I will need it any more

Best regards,
Azuma

Post by **Red Eye** » Mon Feb 25, 2013 4:04 am

Do you have any photos to show?

Post by **RedaV** » Mon Feb 25, 2013 4:20 am

I received mine today also and I am surprised how much I received! What I need to know is it comes in like a loop of the material! Do I need to cut it into one piece or should it be joined together! One side has the flat disc and the other side u can see how the links are joined together! Can someone with a screen accident armor please advise!

Regards

Redav

Post by **azuma** » Mon Feb 25, 2013 6:18 am

RedaV,

I think you are getting a 18" x 60" metal mesh. When I went to the store today, the metal mesh was in a loop like you mentioned. I told the store that the mesh is sold in 18" x 30" on-line for USD45 per piece, so the owner told me that she can sell me half of the sheet and gave me NT$100 off. And she just cut the mesh into two pieces by scissors, that is what you need to do with yours I think.

BTW, how much you paid for the shipping?

Best regards,
Azuma

Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Re: Cheaper Metal Mesh Skirt

Who is online