My first cylon project
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
My first cylon project
I have begun work on my first cylon!! I started this project about 3 years ago and never really got much done. Finally I have time to Work on this project. I am not real sure of the origins of this costume. Going to go with cosmochrome to make him all shiny.
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
- Cylon-Knight
- Site Administrator
- Posts: 6420
- Joined: Wed Jul 23, 2008 9:32 pm
- Location: Kansas City
- Contact:
Re: My first cylon project
Hello darthmiller and welcome to BYC.net!
Your project is looking GREAT, can't wait to see more. I see a mouth grill but not the helmet - still on the to do list?
Your project is looking GREAT, can't wait to see more. I see a mouth grill but not the helmet - still on the to do list?
"All Baseships are now in range to attack the Colonies."
- Red Eye
- Cylon Empire VIP & BYC.net Gallery Admin
- Posts: 4837
- Joined: Sat May 20, 2006 10:11 am
- Location: Germany
Re: My first cylon project
Welcome aboard! What a great start so far.
It's possible your parts originating from the molds of the infamous Bentley O'Toole from down under.
I've got my armor from him, too (and actually received it).
It's possible your parts originating from the molds of the infamous Bentley O'Toole from down under.
I've got my armor from him, too (and actually received it).
"There can be no survivors. So long as one human remains alive the Alliance is threatened."
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
I have the helmet mold just have not started it yet...maybe this weekend
Cylon-Knight wrote:Hello darthmiller and welcome to BYC.net!
Your project is looking GREAT, can't wait to see more. I see a mouth grill but not the helmet - still on the to do list?
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
Not really sure....I got these molds from a guy in the US....I will ask him about Bentley
Red Eye wrote:Welcome aboard! What a great start so far.
It's possible your parts originating from the molds of the infamous Bentley O'Toole from down under.
I've got my armor from him, too (and actually received it).
- Cylon534
- Phalanx Leader
- Posts: 111
- Joined: Fri Apr 20, 2012 1:04 pm
- Location: Southern California
Re: My first cylon project
Your armor will be made of fiberglass? Nice! Looking forward to more updates!
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
Yep
Gelcoat followed by two layers of fiberglass
Gelcoat followed by two layers of fiberglass
Cylon534 wrote:Your armor will be made of fiberglass? Nice! Looking forward to more updates!
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
I did confirm that the armor we molded was from Bentley O Toole. It was the first suit he pulled from his molds. Please note that the individual I got this from is a very trusted member of the prop community.
The suit was all fiberglass and we molded it several years ago. Just finally getting around to making my own suit. I am doing two full suits...one for me and my buddy
I got most of my parts primed today...used a two part urethane automotive primer. Next week I will start the cosmochrome process.
I will post a you tube video of this process later in the week...it's really amazing stuff.
The suit was all fiberglass and we molded it several years ago. Just finally getting around to making my own suit. I am doing two full suits...one for me and my buddy
I got most of my parts primed today...used a two part urethane automotive primer. Next week I will start the cosmochrome process.
I will post a you tube video of this process later in the week...it's really amazing stuff.
- Red Eye
- Cylon Empire VIP & BYC.net Gallery Admin
- Posts: 4837
- Joined: Sat May 20, 2006 10:11 am
- Location: Germany
Re: My first cylon project
Looking forward to see your fully chromed armor!
"There can be no survivors. So long as one human remains alive the Alliance is threatened."
- GoldCylon
- Founder
- Posts: 6946
- Joined: Fri Dec 02, 2005 3:02 pm
- Location: Sacramento
- Contact:
Re: My first cylon project
I think we have one member here maybe two that was had by Bentley. If those members are still active here speak up please to ME in a PM.
Not to detract from your build, but I just wanted to mention this is this thread since the molds put a lot of money in Bentley's pocket at the cost of a member or two via not filling orders they place with Bentley for armor.
Now your build looks great. Do you have a under suit lined up?
Welcome on board.
Not to detract from your build, but I just wanted to mention this is this thread since the molds put a lot of money in Bentley's pocket at the cost of a member or two via not filling orders they place with Bentley for armor.
Now your build looks great. Do you have a under suit lined up?
Welcome on board.
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
Just so we are clear
I made a mold of his suit....I don't have his original molds
I do however have his first suit he pulled which we then molded a few years ago
If anyone on the boards was taken advantage of I would be happy to help them get a suit from my molds
Feel free to PM me
I made a mold of his suit....I don't have his original molds
I do however have his first suit he pulled which we then molded a few years ago
If anyone on the boards was taken advantage of I would be happy to help them get a suit from my molds
Feel free to PM me
Last edited by darthmiller on Mon Jan 07, 2013 9:07 pm, edited 1 time in total.
- darthmiller
- Patrol Member
- Posts: 55
- Joined: Tue Jan 01, 2013 9:37 am
Re: My first cylon project
Still working on the undersuit....if anybody has any suggestions I am all ears
- GoldCylon
- Founder
- Posts: 6946
- Joined: Fri Dec 02, 2005 3:02 pm
- Location: Sacramento
- Contact:
Re: My first cylon project
Thanks for clearing that up about the molds.darthmiller wrote:Just so we are clear
I made a mold of his suit....I don't have his original molds
I do however have his first suit he pulled which we then molded a few years ago
If anyone on the boards was taken advantage of I would be happy to help them get a suit from my molds
Feel free to PM me
Here is a video of a test piece we did last week with the cosmochrome process
I think you all will enjoy this video
http://youtu.be/1QZ2G3XGcew
Who is online
Users browsing this forum: No registered users and 0 guests