Metal mouth grill

Post by **FLIGHTLDR SERPENTINE** » Tue Sep 01, 2015 7:59 am

Not sure about the grill you have. The one that is metal is pretty sharp on it's edges and has a backside like in the pics above. The other version is much softer in detail. Some have described it as "doughy".

Post by **Terry** » Wed Sep 02, 2015 6:38 am

This is the one I have. will post some pics in a couple of day once I pour it.

Pic is not very clear but the grille does have nice sharp detail. It will just depend how well I can remove it from the sand mould when I do it. Cheers Terry

Post by **FLIGHTLDR SERPENTINE** » Wed Sep 02, 2015 7:54 pm

Hard to tell from that image, but I think it is the right kind of mouth plate. If it has a thickness to it and a hollowed out area in the back it is the correct one. There are pics of the correct one posted by Brisfx on the top of page 4. Funny that you and Brisfx live in the same town...

Post by **Terry** » Thu Sep 03, 2015 5:13 am

The first attempt at casting the mouthpiece. I wont have anytime to do more for a week or two. It will depend on when I do another run of aluminium. I have a few more pics that I will upload over the weekend. I have to sit down and work out how much these will cost me to make. They will only be a here and there thing but if anyone does eventually want one I will be able to do enough for everyone. I will also weigh it tomorrow. Out of interest, how do these things attach to the helmet? I havn't got that far with mine yet. Cheers Terry

Post by **FLIGHTLDR SERPENTINE** » Thu Sep 03, 2015 7:46 am

Very cool.
Does your own copy of the mouth piece have a different kind of back to it or does it resemble this one? I only ask because it would be ideal if the impression of the backside were also there. Also, how easy is it to sand/buff the texture smooth? Is it possible to use a finer grade of sand to make the mold?

Post by **GoldCylon** » Thu Sep 03, 2015 8:45 am

It looking great. It looks just like mine.

Post by **Terry** » Thu Sep 03, 2015 2:53 pm

The back is just like mine. The aluminium is easy to sand and polish. Cannot use a finer sand. The texture is from the graphite paint used to seal the mould. I can make it a touch smoother but its time consuming. Cheers Terry.

YouTube · Post by **Cylon-Knight** » Thu Sep 03, 2015 6:19 pm

For your question Terry, only 1 is needed per helmet.

Great work!

Post by **FLIGHTLDR SERPENTINE** » Thu Sep 03, 2015 6:46 pm

Very exciting. Thank you for doing this!

Post by **Brisfx** » Fri Sep 25, 2015 1:00 am

I have the mold sitting here if anyone wants a resin mouthpiece, can pour them immediately

Post by **FLIGHTLDR SERPENTINE** » Fri Sep 25, 2015 6:54 pm

Brisfx! Hey you're back!

Post by **Brisfx** » Fri Sep 25, 2015 9:50 pm

Yes

I am here

Post by **FLIGHTLDR SERPENTINE** » Sat Sep 26, 2015 9:37 am

Welcome back!

Post by **Brisfx** » Sun Sep 27, 2015 9:15 pm

Ok everyone

Mouth grills in resin, cast from an original metal screen used metal mouth grill

$45 US plus $12 shipping (untracked) or ($16 tracked both airmail)

Those shipping prices are to the US only other countries please email me.

regards

Brad

Post by **FLIGHTLDR SERPENTINE** » Mon Sep 28, 2015 7:25 pm

Already have a metal one coming from Terry, but I'll have to get one of these, too.

Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Re: Metal mouth grill

Who is online