Metal mouth grill
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
- Hand-Schaub
- First Centurion
- Posts: 756
- Joined: Mon Dec 29, 2008 9:05 am
- Location: Sacramento, CA
Re: Metal mouth grill
You know... I'll be doing a little bronze work for a friend in the next few weeks. I can easily add a mouth grill to the batch. But bronze DOES shrink slightly and the studio ones were a pot metal (all kinds of metals mixed) I think. I would need to make a rubber mold still which would cost a few bucks. Metal nowadays cost somehting like $20 a lb to raw cast... this includes the investment process, sandblast and cutting.
I can see a bronze cast mouth grill (based off of a studio grill) be around $50 a piece. If that doesn't scare anybody then I can go ahead with this...
Other option would be to ask if there is an alluminun pour. In that case a NEW mouth grill would have to made, molded and cast because alluminum shrinks a lot more than bronze and a larger master would accomodate for that.
I can see a bronze cast mouth grill (based off of a studio grill) be around $50 a piece. If that doesn't scare anybody then I can go ahead with this...
Other option would be to ask if there is an alluminun pour. In that case a NEW mouth grill would have to made, molded and cast because alluminum shrinks a lot more than bronze and a larger master would accomodate for that.
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
I have never had any experience molding and casting with metal. Having said that, I will be attempting to cast a part for my Delorean Time Machine soon. If that is successful, I may attempt the Cylon Mouth Grill. The Delorean part is a lot more complex to muld so I am thinking the mouth grill should be easy.
regards
Brad
regards
Brad
- GoldCylon
- Founder
- Posts: 6945
- Joined: Fri Dec 02, 2005 3:02 pm
- Location: Sacramento
- Contact:
Re: Metal mouth grill
What are you going to cast. I did casting back in the 70's back in high school.
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
I clayed up my metal mouth today, will start pouring the mold tomorrow hopefully
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
One coat of rubber
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
I will be attempting to pour these in metal, its my first time doing this so don't get too excited
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
Re: Metal mouth grill
Any step in the forward direction with this is exciting to me. But I take your point.
"SEARCH FOR WRECKAGE... LEAVE NO SURVIVORS..."
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
Ran out of rubber It took more than i thought so i had to buy another 1kg . It also takes 24 hours to cure. The base is done, will pull it out tonite and prep for the other half of the mold to be poured
- FLIGHTLDR SERPENTINE
- Squadron Leader
- Posts: 510
- Joined: Fri Aug 19, 2011 2:18 pm
- Location: Basestar over Mt. Tamalpais
Re: Metal mouth grill
What type of metal will you be using to cast in it?
"SEARCH FOR WRECKAGE... LEAVE NO SURVIVORS..."
-
- Centurion
- Posts: 39
- Joined: Tue Feb 28, 2006 3:47 pm
- Location: Brisbane, AUSTRALIA
- Contact:
Re: Metal mouth grill
First half done just poured back of mold
Who is online
Users browsing this forum: No registered users and 7 guests